It means there was a generator error, could be the generator needs to be recalibrated, or a bad connection to the tube or bad wire withing the cable harness or worse case a faulty, arcing tube. Errors 26 & 29 in most cases means the tube is arcing and needs to be replaced but you could get lucky with a recalibration or checking the connections to the tube. The high voltage is developed at the tube head which is usually at fault...good luck.
Hi
Hope you are doing fine .
The machine displays E26 during exposure at high kv , But at low KV it exposes.So in case the machine is far from the place how can you support the customer to clear out the error? And what exactly might be , btn the following tupe arcs , CAN connection and cable harness.
Kindly looking forward to have your help
My mail fastone.oscar@yahoo.com
John Mayes
Ziehm exposcop 7000 compact error code 26
July 12, 2012 05:32
Hello can anyone help, getting error code 26, ziehm exposcop 7000 compact?
Thanks in adavance!
to rate and post a comment
Lenny Place
re: Ziehm exposcop 7000 compact error code 26
July 13, 2012 05:14
CAN faulty line low
to rate and post a comment
John Mayes
re: re: Ziehm exposcop 7000 compact error code 26
July 13, 2012 05:54
Thanks, What does that mean?
to rate and post a comment
John LoPresti
re: re: re: Ziehm exposcop 7000 compact error code 26
July 25, 2012 08:00
It means there was a generator error, could be the generator needs to be recalibrated, or a bad connection to the tube or bad wire withing the cable harness or worse case a faulty, arcing tube. Errors 26 & 29 in most cases means the tube is arcing and needs to be replaced but you could get lucky with a recalibration or checking the connections to the tube. The high voltage is developed at the tube head which is usually at fault...good luck.
to rate and post a comment
John Mayes
re: re: re: re: Ziehm exposcop 7000 compact error code 26
July 25, 2012 10:47
Thanks You very much, It helps a lot.
to rate and post a comment
John Mayes
re: re: re: re: Ziehm exposcop 7000 compact error code 26
July 26, 2012 05:47
John can you please email or call me? would like to ask you a question?
mmesllc@hotmail.com
954-445-0810
to rate and post a comment
John LoPresti
re: re: re: re: re: Ziehm exposcop 7000 compact error code 26
July 27, 2012 10:00
John I sent you an email
to rate and post a comment
Catherine WELSH
re: re: re: re: re: Ziehm exposcop 7000 compact error code 26
November 14, 2013 03:04
John can you please help me to have an mess e26 what is this? catwelsh1971@gmail.com can i fix this or does a physicist have to?
to rate and post a comment
Lenny Place
re: re: re: re: re: re: Ziehm exposcop 7000 compact error code 26
November 14, 2013 05:49
this is a CAN error this is a electronic issue
to rate and post a comment
Doug Lally
re: Ziehm exposcop 7000 compact error code 26
July 28, 2012 10:16
maybe swivel harness, their the cause of a lot of problems to generator.
to rate and post a comment
Walaa Khairy
re: Ziehm exposcop 7000 compact error code 26
August 18, 2012 10:06
I also have error code 26 and 32 , can you help ?
to rate and post a comment
Fastone Oscar RUGOTWA
re: Ziehm exposcop 7000 compact error code 26
May 05, 2018 12:43
Hi
Hope you are doing fine .
The machine displays E26 during exposure at high kv , But at low KV it exposes.So in case the machine is far from the place how can you support the customer to clear out the error? And what exactly might be , btn the following tupe arcs , CAN connection and cable harness.
Kindly looking forward to have your help
My mail fastone.oscar@yahoo.com
to rate and post a comment
DMEDS
re: re: Ziehm exposcop 7000 compact error code 26
May 07, 2018 09:46
i have the manuals for this system ,
contact me,
magmesme@gmail.com
thanks
with best regards
to rate and post a comment