MyLab 30

Hi !
You have several problems with the device. Most likely the hard drive is faulty.
What needs to be made.
1 To make the copy of the hard drive Akronis.
2 To write down codes of licenses.
To remove patients from the database, it will be very long (it borrowed me all night long)
3 To disassemble completely the device and to clean from dirt and dust. On board of the computer to remove the black block with a radiator and to change thermopaste on the central processing unit.
4 To replace the hard drive
There can be a problem, hard drives of the IDE format aren't issued any more.
I established Solid-state
disk. For its installation will be necessary the IDE adapter - SATA, the SATA cable, the poiwer splitter for SATA. I bought adapters in China, with board of the adapter the socket deleted SATA and soldered a SATA cable directly (otherwise isn't located instead of an old disk) Kabel stretched under the case to CD rom, in the same place established a new disk.
Several devices are remade, normal weeds more than a year!

Hi

This error happens because this unit is two modules integrated in one machine (one module is the ultrasound and the oher is a Computer), in this case the computer is not loading or has a fault.

The firts thing you need to do is turning on the device after the green bar is displayed you have to press CTRL + ALT + ARCHIVE REV, this will show you what's happening in the computer

Here you will have 3 posibles situations:

1. BIOS battery Low.
2. Blue Error Windows Screen
3. A display Error on Screen.

You also need to have available a USB Keyboard in order to do another test and try to solve the problem.

As I have write you on top, do this test to figure out where the problem is and then you can write me and if sftware or anything esle related to this machine I can help you

Best Regards

Eduardo

I have a ultrasound,my labEight.Xp. have an error.Ecom.exe error.
the Xp Window instaled fine.but in operate service an error.Ecom.exe error.