Regarding the patches , I could not install them because the system dose not detect the DVD Drive and window shows up to see NO CD ROM FOUND " CHECK CD ROM DRIVE '
Note : only DVD RAM drive is installed on machine and the softwares were installed via it.
SO THIS ERROR IS IN TEST NPR ? LAST TIME I HAVE THIS ERROR? I CHANGE DBBPI BOARD BUT IS NOT THIS BOARD FAILD. I CHANGE PCI BOARD PCIBACKPLANE AND IS OK. THE SYSTEM WAS AUTO SHUTDOWN BEFORE. I HOPE THIS CAN HELP YOU
BMI-PMI services nearly every make, model, and modality through our nationwide team of nearly 200 local service engineers. Flexible contracts, 24/7 remote monitoring, and ISO 13485 certification. www.brownsmedicalimaging.com / 800-701-9729
CT/e single slice problem
June 08, 2014 08:48
After loading the application software , BDPCI board is not detected by the application Although it is new .
Please click on the link to see pictures. http://yadi.sk/d/8IdtUuodRhwDr
Appreciating your help .
to rate and post a comment
Santosh Kumar Tiwari
re: CT/e single slice problem
June 09, 2014 09:12
Where r u Located.
to rate and post a comment
Galal
re: re: CT/e single slice problem
June 09, 2014 06:51
Yemen
to rate and post a comment
Kim Schofield
re: CT/e single slice problem
June 09, 2014 09:12
Either your software is not loaded properly or you have not loaded all of the patches.
to rate and post a comment
Galal
re: re: CT/e single slice problem
June 09, 2014 06:51
Regarding the patches , I could not install them because the system dose not detect the DVD Drive and window shows up to see NO CD ROM FOUND " CHECK CD ROM DRIVE '
Note : only DVD RAM drive is installed on machine and the softwares were installed via it.
to rate and post a comment
Kim Schofield
re: re: re: CT/e single slice problem
June 10, 2014 09:22
That is your problem. Figure out what happened with the CD drive
to rate and post a comment
MOI
re: CT/e single slice problem
June 09, 2014 04:06
SO THIS ERROR IS IN TEST NPR ? LAST TIME I HAVE THIS ERROR? I CHANGE DBBPI BOARD BUT IS NOT THIS BOARD FAILD. I CHANGE PCI BOARD PCIBACKPLANE AND IS OK. THE SYSTEM WAS AUTO SHUTDOWN BEFORE. I HOPE THIS CAN HELP YOU
to rate and post a comment