1/ I need support to solve the following error occuring during initialisation : HC11112
The Leds on the power supply are green. But the PS generates a strange noise.
2/ if someone can provide me the service manual
Many thanks in advance.
re: Agfa DS5503 : HC11112 Error during initialisation
June 13, 2025 10:05
Here is the meaning to your error.
I have the manual but it's almost 30M, I can send you a google drive share to get it.
HC11112 is not a power supply error but a MDM Module error.
HC11112 : mdmmodule.mdmlightlow
* Type Failure
* Meaning MDM light detection sensor is detecting too much stray light
* Warning MessageCalibration module not working
* Reason1 MDM detects too much stray light
Cure1 Make sure all side,front and rear covers are properly mounted in order to
prevent stray light disturbing the MDM measurements
Brand new OEM Philips & Siemens Parts at unbeatable prices shipping domestically and Includes warranty!
Email P/N for pricing: sales@Relaxationinc.com
(P) 813-925-1314, www.relaxationinc.com
saeed
Agfa DS5503 : HC11112 Error during initialisation
June 12, 2025 10:59
1/ I need support to solve the following error occuring during initialisation : HC11112
The Leds on the power supply are green. But the PS generates a strange noise.
2/ if someone can provide me the service manual
Many thanks in advance.
to rate and post a comment
Ronald Swapp
re: Agfa DS5503 : HC11112 Error during initialisation
June 13, 2025 10:05
Here is the meaning to your error.
I have the manual but it's almost 30M, I can send you a google drive share to get it.
HC11112 is not a power supply error but a MDM Module error.
HC11112 : mdmmodule.mdmlightlow
* Type Failure
* Meaning MDM light detection sensor is detecting too much stray light
* Warning MessageCalibration module not working
* Reason1 MDM detects too much stray light
Cure1 Make sure all side,front and rear covers are properly mounted in order to
prevent stray light disturbing the MDM measurements
to rate and post a comment