I got a dry star 3000 printer which was working normally ( it boots normally, displays offline and when you press online, it displays ready).
But after a current shortage, it doen't more display ready (it boots normally but it is blocked on offline )and even by pressing online button, it does change.
You can ping the printer from the scanner(for example) but you can not send images to be printed.
Please, any help will be appreciated.
Thanks in advance
From preventive maintenance through comprehensive cryogen services, BMI-PMI is your trusted partner for new/reconditioned sales, installation, and service of both facility-based and mobile MRI solutions. www.brownsmedicalimaging.com / 800-701-9729
DJIELA Flavien
Agfa dry star 3000 printer problem
July 20, 2009 09:12
Hi all,
I got a dry star 3000 printer which was working normally ( it boots normally, displays offline and when you press online, it displays ready).
But after a current shortage, it doen't more display ready (it boots normally but it is blocked on offline )and even by pressing online button, it does change.
You can ping the printer from the scanner(for example) but you can not send images to be printed.
Please, any help will be appreciated.
Thanks in advance
to rate and post a comment
Raymundo Miranda
Re: Agfa dry star 3000 printer problem
July 25, 2009 09:55
Hi sound like corruption software or bad configuration you need the agfa software Imos and cable dv9 to dv25
to rate and post a comment
yuan bo
Re: Agfa dry star 3000 printer problem
July 26, 2009 02:23
i think you need to install the system software use IMOS service software. i have all, if you need ,please contact me. obnauy@163.com
to rate and post a comment