BMI-PMI services nearly every make, model, and modality through our nationwide team of nearly 200 local service engineers. Flexible contracts, 24/7 remote monitoring, and ISO 13485 certification. www.brownsmedicalimaging.com / 800-701-9729
Diego Salazar
March 24, 2015 06:20
Hi i had a mammo system with error 160 could anyone suggest any issue another question i was checking xray tube however i have some questions does t...
Miguel Chavira
February 01, 2015 10:21
i have a problema with the collimator light on a senographe 800T i replace the bulb i checked all switchs but anything does anybody has the wiring dia...
thai tan
November 08, 2014 09:32
Hi I have mammography M-IV Platium Hologic At now the machine appear error 30 and 34 please give some advice Thanks and regards My name thaivttbhueg...
Ogali Daniel
October 31, 2014 09:00
When mains power is switched on i observed that on the supply command board LED De3 and De4 are lit When power on switch is pressed the k1 contactor d...
Francisco Garcia
October 14, 2016 10:38
Hello does anybody knows how to do a kV calibration on the Mammomat 3000 The system Ive got is sending around 10-12 more in value each exposurekV inst...
Tan Aik Hong
July 21, 2014 08:49
Please Help I found error 79 tubeheadstatuserror and the system motor for tubehead control board mirror filter lamp and aperture move in and out in re...
Felipe Canche
July 12, 2014 12:00
Hello my name is felipe I have a problem with our mammography lorad elite The problem is that when we change the spot to small the display appears an ...
AKMAL TURAEV
January 31, 2020 10:24
Hi all i have problem with dmr E51 158019How can i solve this issue Thanks in advance ...
John Orozco
April 23, 2014 09:17
Hello everyone was wondering if anyone can help me locate or email software driver for a Barco MDMG 5121 To jorozcoopimagingnet It would be greatly ap...
Lenny Place
April 17, 2014 05:08
I am looking for wiring diagrams and service manual for this system Thank you...
Ogali Daniel
May 07, 2014 05:32
DataflashSonographe Error no system connected From the manual i have checked the cable connection is okhow and where do i check whether the connect s...
Reynaldo Rosa
February 18, 2015 02:56
Model No 3-000-5074 The Lorad Affinity 2006 is presenting an error code Error 68 Manual says Error 68 is COMMERROR and it is Generated by the co...
zekeng brice
October 29, 2014 04:31
can someone help me I have a problem with a DMR The gantry cpu board was bad and I have change it with an use one that that the cpu battery wasnt the...
Francisco Garcia
November 07, 2013 12:26
Hi everybody Ive got an issue with the diagfragm auto aperture of the system It doesnt go back and stays almost closed all the time limiting the FOV I...
IMS Giotto mammo
Joao Carlso
June 02, 2017 07:46
I need a service manual of an Giotto IMS mammo analogic system Can you help me Thanks ...