We provide sales, service, rental, and repair for ultrasound systems, probes, and C-arms. We have the largest inventory in the world. Contact us about our special offers on certified refurbished equipment! Call: 317-759-9210 Email: sales@probomedical.com.
Mohamed Al-Noseery
GE LUNAR DPX-BRAVO
April 22, 2019 09:25
Hello everyone!
I have a Lunar DPX-Bravo with encore 2006. QA does not go through and give an error "Swing arm not locked in scanning position. Please lock before continuing."
I tried unlocking and locking the swing arm several times with no change. Any advice on troubleshooting will be highly appreciated.
to rate and post a comment
Juan Gaytan
re: GE LUNAR DPX-BRAVO
April 23, 2019 10:06
you have the service manual? write me
Regards
juan.p.gaytan@gmail.com
to rate and post a comment
eduardo medina
re: GE LUNAR DPX-BRAVO
April 23, 2019 10:14
Hello Mohamed, you could follow cables trought inside arm to bulk heal connector inside tablet ir do a bypass on switch ti determine if is bad. Feel free to contact me if need It. lemedina1964@yahoo.com.mx
to rate and post a comment
Juan de la Cruz Martinez
re: GE LUNAR DPX-BRAVO
April 23, 2019 11:13
Have you check if there is a switch that detects the arm is locked?
to rate and post a comment
Rick Ebling
re: GE LUNAR DPX-BRAVO
April 24, 2019 10:16
There are TWO switches in the rotating vertical arm. They have to both be actuated mechanically.
to rate and post a comment
Ben Williams
re: GE LUNAR DPX-BRAVO
April 24, 2019 10:17
HI Mohamed,
You may have a bad limit switch in the arm. There is a limit switch up there that will sense the open and closed position. I would first check to ensure that switch is engaging correctly. If you need parts or other advice let us know.
Ben
info@dexasolutions.com
to rate and post a comment