I am trying to install a stryker Visum LED light system.
I have a setup with 2 sets of dome and 2 monitors on two separate arms.
i dome is 5 pin and another is 9 pin with camera.
When I setup the system, the 5 pin LED dome works fine but 9 pin LED dome gives a communication error.
I have checked the continuity of wires and power supply from dome till power supply as indicated in manual and it is fine.
Do I need to run setup from computer before it works or is there something else wrong.
Looking for help from all quarters.
Thanks in advance
Lightly used system available direct from the end user customer. MONARCH QUEST
Featuring our most advanced, data-driven navigation software with AI-Powered algorithms & advanced imaging integration with the GE HealthCare OEC 3D C-arm.
Keshav Kumar
stryker visum LED
December 22, 2016 04:54
Hi,
I am trying to install a stryker Visum LED light system.
I have a setup with 2 sets of dome and 2 monitors on two separate arms.
i dome is 5 pin and another is 9 pin with camera.
When I setup the system, the 5 pin LED dome works fine but 9 pin LED dome gives a communication error.
I have checked the continuity of wires and power supply from dome till power supply as indicated in manual and it is fine.
Do I need to run setup from computer before it works or is there something else wrong.
Looking for help from all quarters.
Thanks in advance
to rate and post a comment
roberto110337
re: stryker visum LED
August 28, 2024 10:46
hi did you find a resolution to that problem i am having the same issue
to rate and post a comment