siemens mobilett xp no error no exposure
February 20, 2020 09:42
The mobilett xp gave me error 6 and that was because F7 (5 amp) blown. After replacing this fuse the equipment work properly, complete the ready, green light lit, no error, but when pressing exposure only the collimater light lit and nothing happen, no x ray, noerror, exposure light does not lit. handpiece checked and it was O.K.
any help will be appreciated.
to rate and post a comment
re: siemens mobilett xp no error no exposure
February 21, 2020 10:36
Can you hear the tube anode rotation?
re: re: siemens mobilett xp no error no exposure
February 24, 2020 09:22
Yes i can hear the rotating
February 24, 2020 09:29
I can hear rotor sound. All voltages exist. I have only led (V33) in (D1) board does not lit. all fuses checked
February 24, 2020 09:32
ERR 6 Ih < I preheat (filament current error)
Explanation: The instantaneous filament current (test point IH) is less than
the specified nominal value (test point IHS) of the microcontoller (D916).
• Check the resonant filament current (D916; TP-I), the filament current
(D916, TP-IH), and the nominal filament current value (D916, TP-IHS). IH
and IHS must be the same. (Further information is available in the "Filament
of this document).
Possible causes: Defective cable/contacts between D927 (X5) and the single
F5 blown on D927;
February 26, 2020 09:45
Sorry for the mistake. the model is mobilett plus not mobilett xp. i am very sorry. in the errors list error 6 is related to rotation speed.
I checked the connections between single tank and the equipment all were ok. all voltages exist.
If you please have the wiring diagram for this model i will appreciate send me a copy.
Oh, when i tried to do P12 and P13 tests i could not reach them because the list in screen jumps from P11 to P14 directly
re: re: re: siemens mobilett xp no error no exposure
February 28, 2020 10:23
Which serial number is it?
P13 & P14 are firmware dependent
Redstone Healthcare - Exceptionalism is what we do. Offering new and reconditioned ultrasound systems, transducers, parts and service nationwide from machines to transducers, C-arms and more! CALL 1-844-2-Redstone