Siemens Mobilett Plus Error 23 then Cal 7
July 26, 2012 11:57
We have a Siemens Molitett Plus /E/M. When I shot an x-ray 'error 23' comes up. Sometimes 'CAL 7' is displayed. Can anyone tell me what these codes mean?
A service manual would be useful if anyone can supply one.
to rate and post a comment
re: Siemens Mobilett Plus Error 23 then Cal 7
July 26, 2012 05:47
Note: We are a mission hospital in rural Uganda. We cannot afford to pay for a manual. If you can help we would appreciate it!
send me a email address and I will send you the manual you need to recalibrate the unit
re: re: Siemens Mobilett Plus Error 23 then Cal 7
July 27, 2012 09:41
August 04, 2012 05:41
firstname.lastname@example.org kindly send me the manual of mobilett plus
October 30, 2012 01:58
sir can u send me service manual my id is email@example.com
re: re: re: Siemens Mobilett Plus Error 23 then Cal 7
March 09, 2015 08:31
please i need a service manual too
re: re: re: re: Siemens Mobilett Plus Error 23 then Cal 7
March 16, 2015 11:18
look for an email from DropBox
August 03, 2018 04:22
Please I need the siemens mobilette manual. My email address is: firstname.lastname@example.org
August 04, 2018 03:28
I will send to you using myairbridge a ftp site
September 24, 2018 08:38
Please Lenny, I also experience this error 23.can you help me with the manual or give me technical assistance
September 24, 2018 08:39
Please this is my mail @ Lenny.
October 02, 2018 08:47
Yes sorry I have been on vacation loo for an email from a site called myairbridge
October 09, 2018 10:25
Dear Lenny I'm trying to contact you
Zuleantonio@yahoo.com.... very important
October 20, 2018 01:29
Please I need to re-calibrate the system. My email is: email@example.com
October 21, 2018 11:30
Sending you the manuals
January 30, 2019 09:55
I have error 21 in Mobilett plus please guide how to fix and send service manual , email : firstname.lastname@example.org.
January 30, 2019 05:21
Yes look for an email from a site called myairbridge soon
June 12, 2019 09:54
I need this manual too
June 17, 2019 05:11
need an email address?
July 27, 2012 09:36
I have more fault details:
At Low KV and mAs = ‘Cal 7’
At High KV and/or mAs = ‘Err 5’
Previous error code: err 23
In service mode system passes tests; 1 to 5, 7, 11, 14 and 15. Test 10 (adaptation) fails when trying to expose. Other tests were skipped as not relevant.
Test 6 (Capacitor Formation) was not attempted – it takes 100 minutes. Could it help?
If anyone has other ideas please let me know.
July 28, 2012 10:21
i think the problem is in the capacitor bank,that's the kv and ma is not stable,or not calibrated...you should check if the capacitor has no leak...check it one by one...
July 28, 2012 10:39
Would a Capacitor formation test (test 6) fix the problem?
July 30, 2012 09:48
if the capacitor test formation passed,then the capacitor is good,and that is another issue.maybe there is an arching in the tubehead.
re: re: re: re: re: Siemens Mobilett Plus Error 23 then Cal 7
July 30, 2012 09:50
How do I stop the arching?
re: re: re: re: re: re: Siemens Mobilett Plus Error 23 then Cal 7
August 01, 2012 10:51
It is a very difficult to do.you should cAlL a service technician who understand the xray,specially knows how to handle a tUbe head.can u send me a copy of the manual and also the erRor that you encounter thru email@example.com
September 02, 2012 11:42
I have same 23 eror durring exposure. Can somebody help in Chicago?
December 16, 2013 04:24
Siemens Mobillete Plus HP. I have the service manual, but they are block diagrams. Does any have the actual, full schematics?
Check out our large inventory of Electric and Pneumatic Power Equipment, Attachments and accessories from Stryker, Hall and more. We also offer free estimates on reliable repairs and warranties.