need Agfa Drystar 5302 old software
June 26, 2017 10:44
I need old software for Drystar 5302. It was with 1.9.0 and I change it with 3.1.0. But with the new software it can't read old film tags.But the client have a lot of old films.
If someone have any old software - please send me to e-mail: email@example.com
Thank you in advance
to rate and post a comment
re: need Agfa Drystar 5302 old software
June 27, 2017 10:31
nothing to do there. replace printer
re: re: need Agfa Drystar 5302 old software
June 27, 2017 04:12
this is not an option. Better to buy new films, instead printer....
re: re: re: need Agfa Drystar 5302 old software
June 27, 2017 04:29
you cant downgrade. but what is the problem a second film printed with a message or doesnt read the chips at all?
re: re: re: re: need Agfa Drystar 5302 old software
June 28, 2017 10:24
Yes, it can't read the old chips at all....The printer shows them like unknown film,format,type etc....
P.S. and can't downgrade, even it was with lower version ???
re: re: re: re: re: need Agfa Drystar 5302 old software
June 28, 2017 11:17
it is not possible to install lower versions.
June 29, 2017 09:57
I have version 2.1 if it help you i will send
June 29, 2017 03:38
send it to try, but I am afraid, that I wont be able to downgrade the software...
July 12, 2017 09:24
I believe its the film types supported by the software version. Older software versions did not have the RF Tag overule functionality (Printing with Dmax= 2.0 O.D)
It is not just about upgrading but you have to install the patches too
February 12, 2019 10:05
Hi. Can you send it to firstname.lastname@example.org
February 13, 2019 11:51
Abdulnasser Hussein ALWARD
November 29, 2019 02:16
Could kindly send me the software for Agfa drystar 5302 2.1 please
June 30, 2017 05:15
I got the SW. but I do not recommend do the downgrade. Change the RF Tag Reader.
July 04, 2017 12:45
I think that the change of RF Tag Reader wont help,because before I upgrade the software to 3.1.0, it was reading the old tags.... And the bad thing for me, is that the client have hundreds of films with old tag
July 05, 2017 08:07
The same thing happened to me and it worked fine... any way...good luck!
July 07, 2017 07:40
Do you mean, that new RF Tag Readers, reads old tags,with new software ???
July 11, 2017 03:01
I change the RF Tag Reader with another one... and again Unknown format,type etc... but at least it begin to print the old tags(with Dmax=2). The problem is that it not recognize the film size and when I try to print on 14X17, the image is on the half of the film(like 8x10)
October 11, 2018 08:10
Hi Charlie,Could you send me the SW 3.0.0C3 Also do you n[now how much the tag reader for DS5302? Pl send me by email@example.com
Software release 1.8.0_C1 supports DT2B and DT2C film types but the RF Tag overule functionality is not implemented.
So it looks like you were running on this and an upgrade to later versions could solve this issues.
You must also get the patches.
I am sending you version 2.0.0_C3. Try this.
July 12, 2017 11:08
But like I said in first post... I upgrade the software to 3.1.0, and I know that you can't downgrade with lower version
Our engineers are trained strictly on Siemens & GE PET to Guarantee an expert on all service calls. Our large inventory of PET & PET/CT systems & parts
allows us to provide a TRUE Turn-key solution. Ph:866-645-7457