CS Medical TD 100 Automated TEE Probe Disinfector
Purchase instantly by clicking the Buy Now button above. I will invoice freight shipping separately.
This TD-100 Tee Probe Disinfector system is in excellent cosmetic and power tested condition. Manufactured in 2010. It powers on, lights up and properly responds to the controls. I believe it is working but no other testing has been done. I do guarantee it will not be DOA. Used to quickly and automatically disinfect transesophageal echocardiogram transducer probes (TEE Probes) between procedures.
Comes with the CS Medical Automated Tee Probe Disinfector, onboard printer, supply lines, vapor filter and power cord. Used to quickly deliver high level disinfection to TEE probes with a 5 minute disinfection cycle and total process time of 17 minutes which includes 5 rinse cycles. This is a huge improvement compared to the 60 minute manual disinfection process, less labor intensive and prevents oversoaking damage. Uses pre-bottled TD-5 or TD-8 disinfectant and the operator will never have to handle the disinfectant. There is a verification printer to record temperature, operator, instrument number, date, time and disinfection contact time for each cycle. Will require a high quality potable water source and 1 1/2" drain. Each cycle uses one gallon of potable water. Using the pre-bottled disinfector eliminates the need for MRC testing strips. Very space saving wall hugging design only 8" deep.
CS Medical TEE Probe Disinfector System
Serial No: 1040543
120V - 60Hz - 8A
Hospital Grade Power cord
(2) 1/4" water supply lines
Fume Filter Cartridge (PN:CSTDFGLT) Dated 4/15 & 4/16
Uses TD-5 or TD-8 Disinfector Bottles
Automated TEE Probe Disinfector
The TD 100 delivers high level disinfection to TEE probes in ONLY 5 minutes. The TD 100 disinfects each TEE probe with High-level disinfectant and provides printed verification upon completion of successful disinfection cycle. Microprocessor-controlled, the TD 100 is simple to use for any health care professional reprocessing a used TEE ultrasound probe. The TD 100 dramatically reduces the amount of stress and the potential for damage to TEE probes. The system was designed with every aspect of the TEE probe taken into consideration.
High-level disinfection complete in 5 minutes
Five individual rinse cycles after disinfection cycle is complete
Built-in advanced vapor management system captures and neutralizes disinfectant fumes
Microprocessor-controlled for ease of use by medical personnel
Repeatable, verified disinfection cycle
Printed record of successful disinfection cycle
Single-use high-level disinfectant
Full diagnostic check of each disinfection cycle
No MRC testing necessary for high-level disinfectant
120V AC — UL certified
I can't find a thing wrong with this system. It is in excellent cosmetic and power tested condition. Powers on, lights up and responds to keypad controls properly. The sensing switches inside the wells are functional when pushed. I can hear the internal pump running and the printer feeds paper when the feed button is pushed. The supply lines and power cord are good. The time/date were correct on the internal clock when I turned it on. The fume filter looks good but it has an install date or 2015 and a replace date of 2016. The amount of use of the filter is unknown. Cosmetically the case is very clean and nice with no breaks, cracks or chips. The hinged translucent doors for the disinfectant bottle and TEE probe are good and not cracked or broken. There is some minor paint scuffing on the control panel that doesn't affect function. I am confident this device is working or can be made to work by someone qualified.
DOM is 11/12/2010 according to the label
Overall Dimensions: 24" wide x 44" tall x 8" deep
Power cord: 8' long
Supply lines: 10' long
I stand behind everything I sell and I guarantee this CS Medical TD-100 Automated TEE Probe Disinfector is exact to the description and pictures I have provided here or return it for a refund.
This unit weighs 91 lbs and will require freight shipping. To give you some idea it will cost approximately $165.00 for west coast shipping and approximately $250.00 for east coast shipping. It will cost extra for residential delivery, lift gate service, limited access or inside delivery. Contact me with your shipping address for an exact quote.
Pallet weight will be 150 lbs, NMFC is 179320 "Sterilizer Cabinet", Freight Class 100, Dimensions 24x30x52
Pickup is always welcome. located in Coolidge Arizona 85128 which is 40 miles SE of Phoenix Az near I-10
All other international buyers must contact me prior to purchasing for a shipping quote and determination whether this item will ship feasibly to your country. It is large/heavy and will be expensive to ship internationally.