This is fresh surplus from a large public health agency. It appears complete and in good condition. It should be calibrated after it is received.
AutoVent 3000 S/N 20030717005
AutoVent Patient Valve S/N 20030717005
Connecting hose (white)
Air lines (green and white)
Non-rebreathing valve P/N 496 with instructions
Laerdal Pock Mask in hard shell case
According to the manufacturer:
The AutoVent 3000 provides independent controls for tidal volume, BPM and additional inspiratory time settings and offers a wide range of patient applications to meet most critical emergency care situations. It is designed to meet ventilator needs in a variety of applications, from intra– and inter-hospital transports to sophisticated air rescue. The AutoVent 3000 uses state-of-the-art pneumatics to assure reliable, time-cycled constant flow ventilation powered by a minimum of source gas. It may be used with all models of the LSP single patient use ventilation circuits as an added protection against patient cross-contamination. Each AutoVent is accompanied by the proven LSP patient valve with its bright green visual breath indicator, built-in audible pressure limit alarm, and intermittent mandatory ventilation providing gas flow for spontaneous breathing patients. The patient valve is available with an anti-inhalation valve for use in toxic environments. Automatic transport ventilators have been recommended by the American Hospital Association as the preferred equipment to provide ventilator support in the pre-hospital setting.
Supply Pressure Range: 40-60 psig
Operating Temperature: 0° F to 125° F
Storage Temperature: -40° F to 160° F
Frequency - AV2000: 8 to 20 BPM
Frequency - AV3000: 8 to 28 BPM
Tidal Volume - AV2000: 400 to 1200 ml
Tidal Volume - AV3000: 200 to 1200 ml
Flow Rate: 16 to 48 lpm
Inspiratory Time - AV2000: approx. 1.5 or 2.0 seconds
Inspiratory Time - AV3000: approx. .75, 1.5, or 2.0 seconds
Expiratory Time: 1.5 to 6.0 seconds
I-E Ratio: 1:1 to 1:4
Weight: 24 oz. (680 grams)
Dimensions: 6" W x 1-3/4" D x 3-1/2" H
Case Material: polyester
Input connection: plated brass
Output Connection: plated brass
Minute Volume: 0 to 24 lpm
Gas Consumption Driving Gas: 0
Patient Valve Assembly
Flow: as required in demand mode: 0-48 lpm at 50 psig
Peak Inspiratory Flow: 48 lpm at an airway pressure drop of
less than 2.5 cm H2O
Delivery Pressure: 60±5 cm H2O
(Insp.) Crack Pressure: 0 to –2 cm H2O (0 to –.8 in. H2O)
LPM cm H2O (max)
Gas Consumption Driving Gas: 0.5 lpm maximum
Dead Space: 8 ml (excluding mask)
Supply Pressure: 40 to 60 psig
Operating Temperature: 0 F to 125 F
Storage Temperature: -40 F to 160 F
Inlet Fitting: standard male oxygen DISS
Filter: 25 micron stainless steel mesh
Outlet: 22 mm outside diameter x 15 mm inside diameter;
fits standard medical masks, endotracheal tubes, and
Weight: 16 oz. (450 grams)
Materials: body - anodized aluminum; cover - polycarbonate;
outlet fitting - polycarbonate; inlet fitting - plated brass
American buyers will pay only what they pay on purchase. No added taxes or fees will be required on delivery. Delivery normally takes one week.
Canadian buyers should request an invoice in Canadian $ before purchase. 5% tax (GST) will be added to this. An invoice in Canadian funds should be requested prior to purchase.
Buyers from elsewhere are welcome to purchase this item. Shipping will be at cost
Payment by PayPal, VISA or MasterCard.
Regardless of the origin of the equipment, documentation provided or identification appearing upon the equipment, the equipment described and offered here is in no way certified for, recommended for, or offered for any specific use. The buyer is purchasing an item(s) which may have been used for medical purposes and may have the potential to again be used for this purpose, however unless otherwise specified, at the time of sale the item is not considered to be bio-medically certified for use in any jurisdiction. The purchased item(s) is simply a device which operates in the limited manner described in the listing and/or electronic and mechanical components.
The purchaser agrees that the seller shall not be held responsible or liable:
* for any injuries or damages, whether incidental or consequential, associated in any way with the equipment;
* for compliance with regulations on ownership or use of the purchased item within the jurisdiction in which the purchaser resides and/or uses the item.
The purchaser, by buying this equipment, indicates their acknowledgment of, and agreement to the terms of this disclaimer.
The sale of this item may be subject to regulation by Health Canada, the U.S. Food and Drug Administration and other national/provincial/territorial/state and local regulatory agencies. If so, do not buy this item unless you are an authorized purchaser. If the item is subject to Health Canada or FDA regulation and it is to be used for regulated medical services in the Canada or the USA, your payment for it indicates you are an authorized purchaser and will comply with these regulations. If you have questions about legal obligations regarding sales of medical devices, you should consult with Health Canada, the FDA or the regulatory authorities in the jurisdiction in which the item is to be used.
If you find the item is not as described in the ad it may be returned for a purchase price refund. Generally, all of our items have an inspection warranty which kicks in upon delivery for a period of 7 to 14 days. It is not an operational warranty as most items sold on DOTmed require biomedical certification before use. If you require additional coverage please contact us prior to purchase.