Seller assumes all responsibility for this listing.
Condition: Used - Good
Type: Pump Vascular Compression
Model: 6060 AV Impu
Kendall 6060 AV Impulse SCD Dual Channel Controller:
VENDOR DESCRIPTION: The A-V Impulse System has been developed to mimic the natural effects of walking on the circulation of blood in the legs. For the patient who is immobile or partially mobile as a result of trauma, surgery or pathology, the system has been shown to increase substantially the circulation of blood in the legs. The A-V Impulse System can also enhance circulation in the arms by applying impulse compression to the hand.
This helps to decrease the frequency of bedsores, DVT's and peripheral edema. The 6060 uses a foot sleeve with a rigid base that fills with air and then deflates in a programmed cycle, similar to the stimulation from walking. This device has push button control and an LCD display, which displays the pressure status in mmHg.
The A-V Impulse System Model 6060 uses state-of-the-art microprocessor controls and a liquid crystal display for optimum performance, simplicity of set up and troubleshooting. The system consists of a controller connected by air supply hoses to specially designed inflation pads. The A-V Impulse System tubing is a non-disposable, 10 foot tubing to connect the pump to the foot garment.
The system has built-in alarms and displays to alert attention to adjustment requirements and to assist with rapid troubleshooting. The maintenance of blood circulation in the extremities is essential in the immobile patient. The A-V Impulse System achieves this simply, safely and effectively.
Dimensions: 6.4" H x 9.2" W x 10.2" D
Weight: 7.5 pounds
Power: 120V, 0.6A, 60Hz
Output Impulse Pressure: 60-200 mmHg adjustable
Impulse Duration: 1 or 3 seconds adjustable
Cycle Time: Impulse delivered every 20 seconds in default adjustable from 12-20 seconds through CYCLE button
RESOURCES: Kendall 6060 AV Impulse SCD Operating Manual