- Location: NY, USA
- MFG: HITACHI
- Model: Echelon 1.5T
- Type: MRI Scanner
This MRI was installed in 2006 in our facility new and has been under Hitachi Service throughout its life. The system has not been upgraded except software in 2015.
Here is what we think is installed on the system:
Nested S- Map
Here is a list of coils:
Torso Coil (Model: MR-RFC-150) Manufactured: N/A
Head Coil (Model: MR-QHC-150) Manufactured: October 11th 2006
High Resolution Foot Coil (Model: MR-HRF-150) Manufactured: N/A
Breast Array Coil (Part Number: 404-7005-0-00) Manufactured October 2008
RAPID Shoulder Coil (Model: MR-RSC-150A) Manufactured: February 15th 2007
RAPID Torso Coil (Model: MR-RBC-150N) Manufactured: N/A
RAPID PV Coil (Model: MR-PVC-150) Manufactured: N/A
RAPID CTL Coil (Model: MR-CTL-150) Manufactured: May 15th 2007
RAPID C-Spine Coil (Model: MR-CSC-150) Manufactured: September 20th 2006
RAPID Foot Coil (Model: MR-RFC-150) Manufactured: N/A
MA Neurovascular Coil (P/N: 404-7004-0-00) Manufactured: August 2006
MA Wrist Coil (P/N: 404-7006-0-00) Manufactured: October 2006
MA Head Coil (P/N: 404-7000-0-00) Manufactured: July 2006
MA Extremity Coil (P/N: 404-7003-0-00) Manufactured: July 2006
There is on more coil shown in the photos. It is a Body Type Coil (no sticker found)
The magnet will be delivered with at least 87% helium.
The Filtrane chiller which is shown in the photos is a split system and the heat exchanger is on the roof and will not come with the system because the cost to remove it from the roof is $13,000 so it will be left in place.
The injector shown in the photos may not be included with the sale. When you bid assume it is not included.
The equipment is currently installed and operational, is in clinical use and is currently covered by an OEM service contract. This service expires on 12/31/20 Arrangements have been made for the deinstall and rigging. The hospital approved rigging company must be used.
WARNING TO ALL BIDDERS. DESPITE WHAT MAY BE WRITTEN IN THIS AUCTION, DOTMED RECOMMENDS THAT BIDDERS ASSUME THAT THE CONDITION OF THIS EQUIPMENT IS UNKNOWN. DOTMED ENCOURAGES YOU TO INSPECT EQUIPMENT BEFORE YOU BID. ALL ITEMS ARE SOLD 'AS IS' & 'WHERE IS' AND UNLESS THE SELLER HAS INDICATED OTHERWISE, THERE WILL BE NO REFUND.
DOTmed can arrange for the deinstall. DOTmed has arranged for the rigging and opening of the way to remove the equipment. There will be a $1000 cost for the rigging.
The equipment will be available in January 2021
You are free to inspect this equipment but if you want to inspect the equipment please do so before you bid. If you would like to arrange to inspect this equipment click on "Email Seller" above.
If something is not shown in the Auction's Photos or specified in the Auction Description please do not assume it is included. Inquire for specifics by clicking on "Email Seller" above.
The equipment is located in New York, NY.
The Successful Bidder agrees to remit a 20% deposit within 48 hours of the Auction's close and the balance 5 business days prior to the removal date.
The Successful Bidder must demonstrate to DOTmed that it has access to the ramp power supply and a plan for the de-installation.
If the Successful Bidder fails to remit payment according to the schedule described above, then the equipment will be sold to the next highest Bidder and any deposit will be forfit.
Deinstallation, Packing, Crating and Transportation will be paid by the Successful Bidder.
Title will transfer from the Seller to the Successful Bidder upon payment in full.
This equipment is offered in accordance with the "Auction Terms" and "Legal Notice" of www.dotmed.com. No warranty is expressed or implied, including any warranty of merchantability or fitness for a particular purpose. All equipment is sold "as is" and "where is".
Questions about this auction
There have been no questions regarding this auction yet. Ask a question