Hello:
I have a problem with a Lorad Affinity mammo unit, evry time an exposure is performed, I get Error 44 CONTROL, followed by Error 45 CONTROL and Error 25 CONTROL. The exposure is very short and the the film is very light. I will appreciatte any ideas, Thanks.
E Valdes
(6)
Elias Valdes
Lorad Affinity
October 10, 2007 09:47
Hello:
I have a problem with a Lorad Affinity mammo unit, evry time an exposure is performed, I get Error 44 CONTROL, followed by Error 45 CONTROL and Error 25 CONTROL. The exposure is very short and the the film is very light. I will appreciatte any ideas, Thanks.
E Valdes
to rate and post a comment
(81)
(13)
Manuel Casanova
Re: Lorad Affinity
October 10, 2007 07:39
Elias:
The problem appears in manual mode? or only in automatic mode.
Check your AEC.
best regards
Manuel
to rate and post a comment
(6)
Elias Valdes
Re: Lorad Affinity
October 11, 2007 09:44
Thanks, it happens in any mode, manual or auto.
to rate and post a comment
Ralph Childs
Re: Lorad Affinity
October 12, 2007 09:40
Elias,
Your tube is most likely starting to fail.
Scooter
scanner1@eim.ae
to rate and post a comment
(6)
Elias Valdes
Re: Lorad Affinity
October 13, 2007 12:07
Thanks, those are bad news.
to rate and post a comment
Lengyel Akos
re: Re: Lorad Affinity
September 07, 2017 10:38
Hy I have problem my Affinity , Only Error 51. Do you have service manual?
drtapfesz@hotmail.com
Thank you!
to rate and post a comment
(1)
Rodrigo Piva
Re: Lorad Affinity
December 11, 2007 09:56
The problem is the arcing tube, the only way to repair is changing the tube
Bad News
Regards
Rodrigo
to rate and post a comment