Yes, there’s always a chance. Just bring it forward and lock it into place, like you would if you were cleaning the optics, If you’re just moving it within the department, going gently over the bumps.
If you are transporting it to another facility etc., I would put the shipping brackets on.
06650 FPGA error (failure on event
driver access)
Failed on event driver access.
Confirm the following when it recurs.
1. Replace only the CIU and confirm the
operation.
(Especially around the high-speed serial
cable)
2. After backuping the circuit board data,
replace both CIU and CF card, restore the
circuit board data, and confirm the
operation.
Hi, i have almost the same problem, just moving mine in a very short distance in same room. But the lock bracket was dammaged and now ERROR CODE 06550. Help me please????
Best Regards !!!!
Did you try starting the computer first and waiting till it boots before starting the CR? Also is it level? Can you roll the camera back and forth inside smoothly?
Image Technology provides world class PARTS, SYSTEMS, SERVICE & TECHNICAL EXPERTISE to OEM's and ISO's for Philips and Siemens equipment. We own what we sell and are available 24/7. Give us an opportunity to help you. Please call us at 972-223-3008!
(3)
(6)
Glenn R. Hammerquist
Konica Regius 110 moving damage
May 19, 2020 10:35
Can moving a Konica Regius 110 without locking the carriage in place cause damage to the Optical Unit?
Thanks, Glenn
to rate and post a comment
Wildman901
re: Konica Regius 110 moving damage
May 20, 2020 10:23
Yes, there’s always a chance. Just bring it forward and lock it into place, like you would if you were cleaning the optics, If you’re just moving it within the department, going gently over the bumps.
If you are transporting it to another facility etc., I would put the shipping brackets on.
to rate and post a comment
(3)
(6)
Glenn R. Hammerquist
re: re: Konica Regius 110 moving damage
May 21, 2020 10:37
The facility moved it over a tube stand rail without locking it in place and now they have a 06650 error
to rate and post a comment
(82)
(3)
juan pablo amado
re: re: re: Konica Regius 110 moving damage
May 26, 2020 10:48
06650 FPGA error (failure on event
driver access)
Failed on event driver access.
Confirm the following when it recurs.
1. Replace only the CIU and confirm the
operation.
(Especially around the high-speed serial
cable)
2. After backuping the circuit board data,
replace both CIU and CF card, restore the
circuit board data, and confirm the
operation.
to rate and post a comment
gesly cherrelus
re: Konica Regius 110 moving damage
June 05, 2020 09:43
Hi, i have almost the same problem, just moving mine in a very short distance in same room. But the lock bracket was dammaged and now ERROR CODE 06550. Help me please????
Best Regards !!!!
to rate and post a comment
(3)
(6)
Glenn R. Hammerquist
re: re: Konica Regius 110 moving damage
June 05, 2020 10:25
Do you have it plugged in to your router as well as the computer?
to rate and post a comment
gesly cherrelus
re: re: re: Konica Regius 110 moving damage
June 05, 2020 12:00
YES
to rate and post a comment
(3)
(6)
Glenn R. Hammerquist
re: re: re: re: Konica Regius 110 moving damage
June 05, 2020 02:33
Did you try starting the computer first and waiting till it boots before starting the CR? Also is it level? Can you roll the camera back and forth inside smoothly?
to rate and post a comment
gesly cherrelus
re: re: re: re: re: Konica Regius 110 moving damage
June 08, 2020 10:48
Still not working ....
to rate and post a comment
gesly cherrelus
re: re: re: re: re: Konica Regius 110 moving damage
June 08, 2020 10:51
Not working .....
to rate and post a comment