Over 90 Total Lots Up For Auction at One Location - WA 04/08

CPI Genware Software on CPI CMP200

Tags: Radiology - R/F, CPI

(86)
(10)

Chris Salberg

CPI Genware Software on CPI CMP200

May 13, 2016 09:20

Is the Genware calibration software pre-loaded on this machine or do I have to install it on my laptop to run it. If it is a install to my laptop does anyone have a copy of it? Thanks!

Log inor Register

to rate and post a comment

Lenny Place

re: CPI Genware Software on CPI CMP200

May 14, 2016 05:23

all depends on what system the generator is connected to some systems have it loaded on the console, if no console then it gets loaded on your service PC

Log inor Register

to rate and post a comment

(86)
(10)

Chris Salberg

re: re: CPI Genware Software on CPI CMP200

May 15, 2016 04:03

Yes, I found out it was loaded onto the console and taken off and the CD also walked offsite. It has the membrain console type so now I have to find the software.

Log inor Register

to rate and post a comment

Lenny Place

re: re: re: CPI Genware Software on CPI CMP200

May 16, 2016 11:39

email me I can send it to you **redacted**

Log inor Register

to rate and post a comment

(77)
(10)

JERONIMO ROLDAN

re: re: re: re: CPI Genware Software on CPI CMP200

May 30, 2018 09:36


Hi Lenny, Please, could you give me the GENWARE software, DO I NEED A LOT?
THANKS FRIEND.
trytio63@gmail.com

Log inor Register

to rate and post a comment

Lenny Place

re: re: re: re: re: CPI Genware Software on CPI CMP200

May 31, 2018 01:10

Yes sending using myairbridge

Log inor Register

to rate and post a comment

(2)

Abid Farooq

re: re: re: re: re: CPI Genware Software on CPI CMP200

July 05, 2018 11:15

I need Genware32 software if u can provide. My email is starmed@live.com

Log inor Register

to rate and post a comment

Lenny Place

re: re: re: re: re: re: CPI Genware Software on CPI CMP200

July 06, 2018 10:33

Yes look fro an email from MyAirBridge

Log inor Register

to rate and post a comment

(4)

Gabriel Hinton

re: re: re: re: CPI Genware Software on CPI CMP200

February 21, 2019 10:26

Hey there Lenny. You have sent me manuals before and it was much appreciated. Would you be able to send me the download for the GenWare software? Ive got a room that may have a bad tube... my email is ghinton.fse@gmail.com

Thanks in advance,

Gabe

Log inor Register

to rate and post a comment

Lenny Place

re: re: re: re: re: CPI Genware Software on CPI CMP200

February 21, 2019 10:57

Yes look for an email form a site called myairbridge

Log inor Register

to rate and post a comment

(6)
(1)

Peter Erskine

re: re: re: re: CPI Genware Software on CPI CMP200

June 16, 2020 10:41

Hi all. I need help to connect my shimadzu X-ray to a CPI generator. Who can help

Log inor Register

to rate and post a comment

(77)
(10)

JERONIMO ROLDAN

re: re: CPI Genware Software on CPI CMP200

May 21, 2018 06:22

Hi Lenny, please, Please Could you sendme software GENWARE for CPI Indico 100
trytio63@gmail.com.
Thanks, regards.

Log inor Register

to rate and post a comment

Lenny Place

re: re: re: CPI Genware Software on CPI CMP200

May 22, 2018 10:07

Yes look for an email from myairbridge

Log inor Register

to rate and post a comment

(77)
(10)

JERONIMO ROLDAN

re: re: re: CPI Genware Software on CPI CMP200

May 22, 2018 05:06

trytio63@gmail.com
Thanks Lenny

Log inor Register

to rate and post a comment

(11)

Aman Asif

re: re: re: CPI Genware Software on CPI CMP200

February 23, 2023 10:29

Hi Csn any one send me software Genware for indigo 100, I am having APR error

Log inor Register

to rate and post a comment

(20)

Tranzrad

re: re: CPI Genware Software on CPI CMP200

November 17, 2022 09:59

We would be greatfulmof you could share the genware sw for thr cpi gmp200 as we need to change he the x-ray tube from a Toshiba 7242 to a 7239. We greatly appreciatte it.

Log inor Register

to rate and post a comment

(192)
(44)
(1)

Dante Nuevo

re: CPI Genware Software on CPI CMP200

May 15, 2016 04:07

Good day.

Contact me. I will send you the software.

Dante Nuevo
dantenuevo@hotmail.com

1 person liked this
Log inor Register

to rate and post a comment

(9)

DANIEL MAMANI

re: re: CPI Genware Software on CPI CMP200

June 21, 2016 05:31

Please Could you sendme software for CPI Indico 100 RAD

Log inor Register

to rate and post a comment

(77)
(10)

JERONIMO ROLDAN

re: re: re: CPI Genware Software on CPI CMP200

May 17, 2018 09:16

Hi dear, please sedme softaware genware
For indico 100. Thanks
Trytio63@gmail.com

Log inor Register

to rate and post a comment

(4)

Mastin Snead

re: re: CPI Genware Software on CPI CMP200

November 03, 2016 10:32

I have an APR memory error. Would the software help or do I need a new console? CMP 200.

Log inor Register

to rate and post a comment

(4)

Mastin Snead

re: re: CPI Genware Software on CPI CMP200

November 03, 2016 10:32

Looking to get in on the software as well. I have an APR memory error actually.
Thanks,
-M
massnead2@aol.com

Log inor Register

to rate and post a comment

(4)

Mastin Snead

re: re: CPI Genware Software on CPI CMP200

November 03, 2016 10:32

Looking to get in on the software. Getting an APR memory error.

Log inor Register

to rate and post a comment

(1)

Artem Artemov

re: re: CPI Genware Software on CPI CMP200

June 22, 2017 08:28

Please Could you send me software for CPI Indico 100 RAD
Thanks advance

Log inor Register

to rate and post a comment

Lenny Place

re: re: re: CPI Genware Software on CPI CMP200

June 22, 2017 10:32

I can but would need an email address

Log inor Register

to rate and post a comment

(1)

Kristian Buna

re: re: re: re: CPI Genware Software on CPI CMP200

April 23, 2018 09:54

Hello! Can you please send me the software as well? Email: KristianBuna@gmail.com

Log inor Register

to rate and post a comment

Lenny Place

re: re: re: re: re: CPI Genware Software on CPI CMP200

April 23, 2018 05:27

i am sending to you using MyAirBridge

Log inor Register

to rate and post a comment

(25)
(2)

Daniel Curariu

re: re: CPI Genware Software on CPI CMP200

September 19, 2017 09:29

Hello.I have a Magnum C DR generator with APR Memory error.Can u please send me the GenWare MP Pc software.Thank you.

Log inor Register

to rate and post a comment

(25)
(2)

Daniel Curariu

re: re: CPI Genware Software on CPI CMP200

September 19, 2017 09:21

My email is danpshyco@yahoo.com

Log inor Register

to rate and post a comment

stats
DOTmed text ad

Your one-stop source for all Pre-Owned Medical Imaging Equipment needs.

Medilab Global provides high-quality pre-owned imaging equipment, parts, and service to the healthcare industry worldwide. Our number 1 position is to provide excellent customer service.. 305-234-0084 | Email: info@medilabglobal.com | Hablamos Español

DOTmed Certified DOTmed 100 stats
advertisement

Upcoming Auction Events

NorthWest Supply
TIMED
Apr 08, 2024 (98 lots)