MPN: XL 8413940
br vocab="" typeof="Product"> This is a DRAGER Evita XL 8413940 Portable Patient Ventilator. This machine has not been fully tested, however it does power on, light up, respond to touchscreen prompts and navigate on-screen menus with ease. Internal battery is holding a charge. Guarantee it will not be DOA.
Drager Evita XL 8413940 Adult & Pediatric Portable Patient Ventilator System
Drager Evita XL 8413940 Adult & Pediatric Portable Patient Ventilator System
Click images to enlarge
Description
Description
This is a DRAGER Evita XL 8413940 Portable Patient Ventilator. This machine is used does have normal wear to include a small crack in the case of monitor and in the base of the stand , this will not affect the overall functioning of this machine. This machine has not been fully tested, however it does power on, light up, respond to touchscreen prompts and navigate on-screen menus with ease. Internal battery is holding a charge. Guarantee it will not be DOA.
Comes with the Drager Ventilator, hospital grade cord and 250 page CD Manual . I am easily able to set parameters for Breath rate, Pressure, PEEP, and high / low pressure alarms. There is a standby, ventilate and menu/esc modes. It is touchscreen and has digital settings. The front of the rolling stand has arm clamps to grip the gas cylinder and right below the monitor are gas inlet outlet ports. On the rear of the ventilator are ports for temperature, etco, 3 RS-232 ports and an optional SpO2 port. There are are Valve hookups for gasses and an internal fan with power settings and switch.
Specifics
Drager Evita XL Adult Pediatric Portable Ventilator
Model : XL-8413940
Serial No: DRPB-0056
100-240V~ , 50/60 hz , 3.2 , 1.2 Amps
Software V 7.06
adult or Pediatric
Internal Battery (AC/DC)
Settings:
Ventilation Frequency: 0-100 min, Inspiration Time: 0.1-10s, Tidal Volume- Pediatrics: 0.02-.3 L, BTPS Accuracy: 10% of set value, or +/- 10 mL (whichever is greater) Adults: 0.1-2.0 L, BTPS Accuracy: 10% of set value, or +/- 25 mL (whichever is greater) Inspiratory Flow: Pediatrics: 6-30 L/min, Adults: 6-120L/min, Inspiratory Pressure: 0-95 mbar, Inspiratory Pressure Limit: 0-100 mbar, O2 Concentration: 21-100 Vol% , Accuracy: +/- 5% of set volume, or +/-2 Vol% (whichever is greater), Positive End Expiratory Pressure (PEEP) or interm PEEP: 0-50 mbar, Trigger Sensitivity 0.3-15 L/min, Pressure Assist: 0-95 mbar, Rise Time For Pressure Assist: 0-2 s, Independant Lung Ventilation - Master: with trigger/without trigger, Slave: synchr., asynchr., Inverse I: E
APRV Airway Pressure Release ventilation
ATC Automatic Tube Compensation
Airway pressure PAW
Expiratory minute volume MV
Inspiratory tidal volume, VTi
Inspiratory O2 concentration FiO2
Inspiratory breathing gas temperature T
Expiratory CO2 concentration, etCO2 (optional)
Apnoea time
Tachypnoea Changes in these parameters may be caused by:
Acute changes in the patient's condition
Incorrect settings and faulty handling
Equipment malfunctions
Failure of power and gas supplies
ETCO Tidal Wave
Rolling Stand
Referece: 8411950
Manufacturer's Description
Intended Medical Application EvitaXL long-term ventilator for intensive care. For adults, children and neonates. For premature babies with the "NeoFlow" option. With the following ventilation modes IPPV (Intermittent Positive Pressure Ventilation) Volume-controlled ventilation with fixed mandatory minute volume. With the options: CPPV (Continuous Positive Pressure Ventilation) Controlled ventilation with continuous positive airway pressure PLV (Pressure Limited Ventilation) Pressure limited constant-volume ventilation AutoFlow for automatic regulation of "Insp. Flow" and "Pinsp" IRV (Inversed Ratio Ventilation) Ventilation with inversed inspiration/expiration ratio. SIMV (Synchronized Intermittent Mandatory Ventilation) Combines mechanical (volume-controlled) ventilation with spontaneous breathing. With the options: PLV (Pressure Limited Ventilation) Pressure limited constant-volume ventilation AutoFlow for automatic regulation of "Insp. Flow" and "Pinsp". MMV (Mandatory Minute Volume Ventilation) Spontaneous breathing with automatic adjustment of mandatory ventilation to the patient's minute volume requirement. With the options: PLV (Pressure Limited Ventilation) Pressure limited constant-volume ventilation AutoFlow for automatic regulation of "Insp. Flow" and "Pinsp". SB (Spontaneous Breathing) Spontaneous breathing at ambient pressure. CPAP (Continuous Positive Airway Pressure) Spontaneous breathing with positive airway pressure. ASB (Assisted Spontaneous Breathing) Pressure-assisted spontaneous breathing. BIPAP* (Biphasic Positive Airway Pressure) Pressure-controlled ventilation combined with free spontaneous breathing during the complete breathing cycle, and adjustable pressure increase to CPAP level. BIPAPAssist (Biphasic Positive Airway Pressure Assisted) Pressure-controlled assisted ventilation. APRV (Airway Pressure Release Ventilation) Spontaneous breathing on two pressure levels with long time ranges independently adjustable. PPS Proportional Pressure Support (optional) For differentiated proportional support of spontaneous breathing with pathological compliance and/or resistance. ILV Independent Lung Ventilation, Separate, differentiated, synchronised ventilation with two Evita units, independently ventilating each lung. Supplements Automatic Tube Compensation ATC (optional) Can be used with all ventilation modes. ATC Compensates for the resistance of the ETT or Tracheal Tube. Apnoea Ventilation For switching over automatically to volume-controlled mandatory ventilation, if breathing stops. If apnoea occurs, EvitaXL emits an alarm after the preset alarm period (TApnoea >) and starts volume-controlled ventilation. NIV mask ventilation (optional) Non-invasive ventilation For ventilation with a nasal or facial mask to support non-invasive ventilation of patients with spontaneous breathing. Choice between mask ventilation and ordinary ventilation of intubated patients. * Licensed trademark Instructions for Use EvitaXL 9 Intended Medical Application Lung Protection Package (optional) QuickSet Direct adjustment of setting, PressureLink Linking of the PEEP/Pinsp settings, Recruitment trends and Low Flow PV-Loop Aid for performing Recruitment procedure and for the optimisation of Ventilator settings. Diagnostic functions Intrinsic PEEP-measurement For determining intrinsic PEEP and measuring trapped volume. Occlusion pressure measurement For evaluating breathing drive during spontaneous breathing. Negative Inspiratory Force NIF For measuring the patient's maximum inspiratory effort following expiration. Monitoring: Airway pressure PAW Expiratory minute volume MV Inspiratory tidal volume VTi Inspiratory O2 concentration FiO2 Inspiratory breathing gas temperature T Apnoea time Tachypnoea Expiratory CO2 concentration etCO2 (optional) DC power supply Integrated DC power supply supplying EvitaXL with power from two DC sources: Via two 12 V lead-gel batteries integrated in the DC power supply, and optionally via additional external 12 V or 24 V lead-gel batteries. For uninterrupted operation following failure of the mains power supply, by automatically switching over to the external or integrated battery. For supplying power from the integrated batteries or additionally from external batteries during transport within the hospital. Evita 4 Link (optional) Interface card For output of measured values, status messages and alarm messages to on-line equipment for monitoring, documentation or processing. O2 Therapy (optional) Continuous flow application with adjustable O2 concentration and adjustable flow for the O2 Therapy function for patients with independent breathing and using oxygen masks. SmartCare/PS (optional) Knowledge-based system for automating clinical guidelines. Automatic gas switch-over In the event of a gas failure, the EvitaXL automatically switches over to the remaining gas supply available. Uses On the intensive-care ward or in the recovery room. While transferring ventilated patients within the hospital.
Condition & Testing
This ventilator system is in decent cosmetic condition. This machine May need to be calibrated This machine is used does have normal wear to include a small crack in the case of monitor and the base of the stand, this will not affect the overall functioning of this machine. This machine will power on, lights up and responds to touchscreen prompts. The power button is in the back of machine under a plastic overlay. The display is working and I am able to change the settings using the controls. It was recently removed from a working facility so it has recently been used. I believe it is working properly but my knowledge of the operation of this device is very little at best. While testing i got several alarms from various functions which I think is normal since I didn't have a patient circuit or oxygen supply to properly test. The battery had a charge when I got it, but I did plug it in and the battery charge light came on. The filters look good with no visible debris. I guaranteed this machine not to be DOA
Age
Unknown
Dimensions
Overall Dimensions: 25" x 23" x 57.5"
Monitor Dimensions: 15"
Wheels Dimensions: 5"
2-Locking Front Wheels
6-FT Power Cord
Warranty
I stand behind everything I sell and for 30 days I guarantee this Drager Evita XL 8411950 Patient Ventilator is exact to the description and pictures I have provided here or return it for a refund
Shipping
This unit weighs 162 lbs and will require freight shipping.
Pallet weight is 237 lbs
Pallet dimensions are 36" x 30" x 68"
NMFC is 56680 " Medical Machinery "
Freight Class is 150
To give you some idea it will cost approximately $ 665.19 for west coast shipping and approximately $ 449.88 for east coast shipping.
Residential delivery, limited truck access, lift gate service and inside delivery does cost extra. Contact me with your shipping address for an exact quote.
Pickup is always welcome. located in Coolidge Arizona which is 40 miles SE of Phoenix Az near I-10
All other international buyers must contact me prior to purchasing for a shipping quote.
"The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so, do not buy this item unless you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item."
Regardless of the origin of the equipment, documentation provided or identification appearing upon the equipment, the equipment described and offered here is in no way certified for, recommended for, or offered for any specific use. The purchaser agrees that the seller shall not be held responsible or liable for any injuries or damages, whether incidental or consequential, associated in any way with the equipment.. The purchaser, indicates their acknowledgment of, and agreement to the terms of this disclaimer. There are no warranties which extend beyond the description on the face hereof. This item has been cleaned and handled in accordance with the manufacturer's instructions..
Return Policy