The following are just some of the products and services on display at AHRA 2018.

FerrAlert™ F.I.L.M
Kopp Development - Booth 520
Kopp Development Inc., the leading manufacturer of ferromagnetic detectors for MRI Safety is the ONLY supplier of the ferromagnetic incident log manager, FerrAlert™ F.I.L.M. The F.I.L.M. device is able to provide an automatic visual trace of the unintended ferrous events at the magnet room door. The logging of these events entering the MRI room is now required by The Joint Commission. The features of this device are very useful for TJC compliance as well as internal Root Cause Analysis. Our new software makes it even easier to create these logging reports for TJC’s inspections. FerrAlert™ detectors are recognized to be the most accurate ferromagnetic detection systems for MRI, due to their unique, patented technology to detect and precisely locate offending ferrous objects.

Sofia 3D Breast Ultrasound
Hitachi Healthcare Americas - Booth 400
SOFIA solves the economic and logistic challenges associated with whole-breast ultrasound by using a full-field radial scanning method. The resulting throughput, efficiency, and patient comfort make SOFIA the ideal solution for women with dense breasts. SOFIA scans an entire breast in a single 30-second radial sweep. SOFIA does not require a dedicated room allowing you to use SOFIA for a wide variety of diagnostic ultrasound exams in addition to whole-breast imaging. Unlike other systems, it requires no additional consumables and no time-consuming pre-scan preparation. Designed to reduce patient anxiety by providing the most comfortable and private exam possible, exams are done in the prone position, allowing the patient to rest comfortably and remain completely covered during the short scan.

SONIALVISION G4
Shimadzu Medical Systems USA - Booth 404
The SONIALVISION G4 is a highly versatile RF system designed to perform a wide variety of examinations, including angiography, orthopedic, video fluoroscopy (for swallowing exams) and general radiography. The G4’s Next Generation digital imaging platform is capable of Tomosynthesis, an advanced application option used for 3D like imaging. Also available is Slot Advance Radiography, an EDGE application used for long spine and limb imaging. The G4 table is bariatric rated and supports a 700lb static patient load.

Aftermarket CT Replacement Tube - MCS 8064
Varex Imaging - Booth 1309
Varex Imaging’s MCS 8064 Computerized Tomography (CT) replacement tube for Lightspeed® VCT series scanners is an anode end grounded (AEG) replacement X-ray tube and offers lower life cycle costs. The MCS-8064 installs and calibrates on the LightSpeed VCT like the original OEM tube, and Varex Imaging offers a full 12-month warranty.


MobileDaRt
Shimadzu Medical Systems USA - Booth 404
The MobileDaRt is Shimadzu’s Next Generation mobile radiographic system with designed in features and value like “Glideview”, the MX8’s collapsing X-Ray tube column that raises the bar where features and operability are concerned. Using Shimadzu exclusive technology, the X-Ray tube column appears to glide on air with effortless motion, regardless of the direction of extension. Other exclusive features include a LED equipped collimator with a duplicate set of shutter controls on the back face as well as the front face. An adjustable height driving handle allows both tall and average height operators to comfortably drive without awkwardness.

iFIX Patient Stabilization System
Beekley Medical- Booth 911
Introducing iFix – a patient stabilization system that conforms to patient anatomy like a second skin. Comprised of both reusable and single-use components, iFIX’s versatile design allows for a variety of uses offering a head-to-toe solution for patient stabilization in multiple modalities. The comfortable iFIX Fleece stretches and gently “hugs” the contours of the patient’s body for gentle, yet secure stabilization. iFIX’s Fleece and other single-use components allow for increased hygiene, and lower the risk of cross-contamination over other methods. Ideal for use CT, MRI, X-ray, Fluoroscopy, and Ultrasound. iFIX is distributed by Beekley Corporation to customers within the United States and its territories.

Nexus DR Software
Varex imaging – Booth 1309
Nexus DR is advanced, digital x-ray image acquisition software designed to quickly and easily automate patient workflow and obtain higher quality images using less dose. Integrated with Varex 14x17 wireless cassette-sized detectors, Nexus DR provides a cost effective and trouble-free solution that includes advanced image processing algorithms for optimal image quality and excellent reliability. Nexus DR is an efficient solution designed to provide fast and accurate diagnostic images with minimal user interaction.

TomoSpot® Skin Markers for 3D Breast Tomosynthesis
Beekley Medical - Booth 911
Communicate without saying a word. A universal skin marking system provides clarifying communication between patient, technologist, and radiologist for a more precise interpretation. Whether you are imaging in 2D or 3D, make sure your team is on the same page. The Beekley Skin Marking System® for Mammography offers 5 distinctive shapes for marking moles, scars, nipples, palpable masses and non-palpable areas of concern/points of pain. TomoSPOT skin markers are tested and proven for use with 3D mammography equipment. Beekley’s lowest density formula subtly highlights areas of interest with clear visualization of underlying tissue and reduces slinky artifact that can be seen with denser markers.

PowerLook® Tomo Detection
iCAD, Inc. - Booth 1024
PowerLook® Tomo Detection built on Artificial Intelligence, is designed to optimize digital breast tomosynthesis (DBT) reading efficiency, streamline workflow, and support cancer detection without compromising clinical performance or increasing recalls. 2D digital mammography typically produces four images per exam, while DBT presents the radiologist with hundreds of images; which takes significantly more time to review and interpret. PowerLook Tomo Detection automatically analyzes each tomosynthesis plane, helping radiologists identify suspicious areas with greater speed and precision. The suspicious areas identified are blended onto a 2D synthetic image, creating a single enhanced image. The process allows radiologists to navigate the large tomosynthesis dataset more efficiently with greater confidence.

Philips DigitalDiagnost
Philips Healthcare - Booth 821
Philips DigitalDiagnost is a flexible, scalable DXR system used for everything from high performance rooms to emergency rooms. Match financial scope with clinical needs by choosing from scalable setups. Two proprietary apps support fast and informed decision making and a high level of personalized processes: The intuitive Eleva user interface and wireless SkyPlate detectors with gridless SkyFlow technology promote improved workflow, and its multiple room configuration options allows you the flexibility to create the perfect DXR room to meet your clinical needs.

Philips ProxiDiagnost N90
Philips Healthcare - Booth 821
The Philips ProxiDiagnost N90 maximizes the clinical capability and high-throughput of your fluoroscopy room by combining high-end fluoroscopy with digital radiography in a single system. Its small footprint and slim design allow healthcare providers and caregivers to be closer to the patient during procedures, and its dynamic UNIQUE image processing provides better fluoro image quality and greater detail than ever before. You can care for your bariatric patients with its high 660 lb. table weight capacity (550 lbs tilting) and 23.6" clearance between table and tower, yet offer premium dose efficiency for your pediatric patients via grid control fluoroscopy with in-pulse control and 0.5 - 30 fps frame rate capability. The intuitive Eleva user interface and wireless SkyPlate detectors with gridless SkyFlow technology promote improved workflow, and its multiple room configuration options allows you the flexibility to create the perfect DRF room to meet your clinical needs.